Access .#..Code..Level
Codes 1 0 NONE
2
0 SECUR
....
64 0 NONE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Login, Utils - Set Access (MM->8->2)
Access .#..Code..Level | ||||||||||||
|
This menu provides security codes and access right for 64 separate users. Access Level may be set to:
NONE - view controller data (display only)
ENTRY - view and edit controller data
DIAG - view and edit data plus run controller
diagnostics
SW LD - same as DIAG plus the ability to load new
controller software (flash prom programming)
SECUR - highest security level; same as SW LD plus the ability to set security levels
Note, the default security codes are all zero when you initialize the controller under MM->8->4. This effectively disables all security in the machine. If you change any of these security codes, make sure that you have at least one user with SECUR level access rights. Otherwise, you will not have full access to the controller. If you get "locked out", you can always upload the datafile to StreetWise and modify the security codes in the database.
