Time Base Scheduler  -  Easy Schedule     (MM->4->2)

Note:  Easy Schedule is a controller shortcut method for programming the Advanced (NTCIP) Schedule.  The controller does not actually store Easy Schedule entries in the NTCIP database.   Therefore, you will not see this programming when reading the NTCIP database from StreetWise.

If  the Day range in Easy Schedule is set to ALL, you will see an "X" stored in each day-of-week entry for event# 1 in the Advanced (NTCIP) Schedule (MM->4->3).  You could program the same event by entering separate day-of-week entries in the Advanced (NTCIP) Schedule and these values will be converted to Easy Schedule if the range values are consecutive.  However, if the days-of-week selected are Mon. and Wed., you will see these values translated as *** in Easy Schedule because the day-of-week range is not continuous.  The Easy Schedule was developed as a controller feature to make the NTCIP schedule easier to program and understand; however, it does not prohibit you from programming any schedule desired using the Advanced (NTCIP) Schedule.