Main Menu - Coordinate

  Coord Parms  | Pattern        |             
  1.Modes,+     4.Pattern Tbl   7.Splits     
  2.Ext. I/O    5.Trans,CoorŲ+  8.Status/Util
  3.CIC Plans   6.Alt Tables+   9.Pat OftInh

This menu provides access to all coordination parameters and timing patterns. 

Coordination is defined by a Pattern under menu 4.  A timing Pattern is a combination of:

In addition the Transition (offset correction) and alternate timing tables associated with each pattern may be programmed using menu selections 5 and 6.