Automatic Flash -  Phases / Overlaps (MM->1->4->2)

 Auto Flash     ---- Flash Yellow -----    
       Phases    2  6  0  0  0  0  0  0
         (more)  0  0  0  0
       Overlaps  1  2  0  0  0  0  0  0
         (more)  0  0  0  0

The Automatic Flash mode setting (MM->1->4->1) determines whether flash is implemented through the load switch channels (CHANNEL or Ø / OLAP mode) or through the cabinet facility (VOLT-MON mode).  If the Ø / OLAP mode is used, this menu programs which output channels flash yellow (all other active output channels will flash red).

Example: The menu above implements yellow flash on phases 2 and 6 and overlaps 1 and 2 when Ø / OLAP mode is used.

All of these data objects are implemented as Naztec MIB's under NTCIP.