Phases - Alt Progs+ (Call/Inh/Redirect,  MM->1->1->6->3)

Alt-2             Inhibit Øs 1111111 ->      # Ø   .Call.Øs..  12345678 90123456   1 1   6  0  0  0  ........ ........   2 0   0  0  0  0  ........ ........   3 0   0  0  0  0  ........ ........   4 1   6  0  0  0  ....X... ........   5 0   0  0  0  0  ........ ........   6 0   0  0  0  0  ........ ........   7 0   0  0  0  0  ........ ........   8 0   0  0  0  0  ........ ........

Alternate Tables are assigned to each pattern under Alt Tables+ (MM->2->6). Alternate Tables for Interval Times vary the base phase timing set under MM->1->1->1 by time-of-day.  There are 2 Alternate Tables for Call/Inhibit/Redirect.  The above screen is displayed after selecting Alternate CIR Table #2.  

Assign Ø - Note, that that the phase number is assigned to a row (row # 1 - 8 does not refer to Ø1 - Ø8).

Also, note that if you assign a phase to a row, then EVERY VALUE FOR THIS PHASE MUST BE ENTERED IN THIS ROW.    

For example, row 1 in the menu above assigns a new call Ø to Ø1, BUT EVERY OTHER VALUE IN THE ROW FOR PHASE 1 IS NOW ZERO!  If you only want the call Ø to change, you still must copy over the other call/inh/redirect values from menu MM->1->1->3 or else the controller will zero these values.  The Alternate Call/Inh/Redirect Values for Ø1 shown in row # 4 is an example of what was intended here.