A.6 UNIT CONFORMANCE GROUP (NTCIP 1202 ver 2.18)

Links to the menu simulator are provided below for the Parameter objects (P/P2 Object Type).   Parameter objects (highlighted in yellow) are defined in the controller database and can be set by the user through the menus (see A.1.1 TYPE SYMBOLS).  Status objects (S object type) are  "read-only" objects and cannot be changed by the user through the controller menu.  Control objects (C object type) are typically modified by controller hardware inputs or by the signal system (not through the keyboard).

These references are provided to help the user identify each object from the controller menu and are not intended to serve as a compliance statement.  After you click on the link, use the "Page Up" key to move to the controller menu providing access to the object.

Return to the Main Menu

UNIT CONFORMANCE GROUP

NTCIP 1202
Clause

Object
Name

Object
Type

Object
Status

Object
Support

Allowed
Values

Supported
Values

2.4

Unit Conformance Group

--

O

Yes / No

-----

----

2.4.1

unitStartUpFlash

P

2.4 : M

Yes

0-255

 

2.4.2

unitAutoPedestrianClear

P

2.4 : M

Yes

1-2

 

 

disable(1)

--

---

Yes / No

---

---

 

enable(2)

--

---

Yes / No

---

---

2.4.3

unitBackupTime

P

2.4 : M

Yes

0-65535

 

2.4.4

unitRedRevert

P

2.4 : M

Yes

0-255

 

2.4.5

unitControlStatus

S

2.4 : M

Yes

1-8

 

2.4.6

unitFlashStatus

S

2.4 : M

Yes

1-8

 

2.4.7

unitAlarmStatus2

S

2.4 : M

Yes

0-255

 

2.4.8

unitAlarmStatus1

S

2.4 : M

Yes

0-255

 

2.4.9

shortAlarmStatus

S

2.4 : M

Yes

0-255

 

2.4.10

unitControl

C

2.4 : M

Yes

0-255

 

 

Bit 0 - Reserved

--

---

---

---

---

 

Bit 1 - Reserved

--

---

---

---

---

 

Bit 2 - External Minimum Recall

--

---

Yes / No

---

---

 

Bit 3 - Call to Non-Actuated 1

--

---

Yes / No

---

---

 

Bit 4 - Call to Non-Actuated 2

--

---

Yes / No

---

---

 

Bit 5 - Walk Rest Modifier

--

---

Yes / No

---

---

 

Bit 6 - Interconnect

--

---

Yes / No

---

---

 

Bit 7 - Dimming Enable

--

---

Yes / No

---

---

2.4.11

maxAlarmGroups

S

2.4 : M

Yes

1-255

 

2.4.12

alarmGroupTable

--

2.4 : M

Yes

----

----

 

alarmGroupEntry

--

2.4 : M

Yes

----

----

2.4.12.1

alarmGroupNumber

S

2.4 : M

Yes

1-255

 

2.4.12.2

alarmGroupState

S

2.4 : M

Yes

0-255